7 JCI-accredited hospitals · 45+ hospitals & clinics · 90+ countries served · 24/7 multilingual support
Oral Health

How Long Do Fissure Sealants Last? Wear, Chipping and Check-Ups That Keep Them Working

23 min read
How Long Do Fissure Sealants Last? Wear, Chipping and Check-Ups That Keep Them Working

Key Takeaways

  • CDC data show sealants prevent about 80% of back-tooth cavities for two years after placement and about 50% for up to four years, with NHS guidance describing a typical lifespan of 5 to 10 years.
  • Moisture on the tooth during placement is the leading cause of early sealant loss, which is why partly erupted molars are often sealed later or with glass ionomer.
  • A cavity does not develop under an intact seal, and sealing over early non-cavitated enamel changes tends to arrest them, but a lifted edge can trap plaque and needs repair.
  • Resin sealants stay physically intact longer while glass ionomer releases fluoride; the Cochrane review found insufficient evidence to rank one above the other for preventing cavities.
  • Ice, hard candy, pen-chewing and night grinding chip sealant edges, while brushing, flossing and fluoride toothpaste remain necessary because sealants cover only the chewing surface.
  • Children without sealants have almost three times more first-molar cavities than children with them, according to CDC data, making permanent molars at ages 6 and 12 the usual targets.
Quick Answer

Fissure sealants typically last several years rather than a lifetime. CDC data show they prevent about 80% of cavities in back teeth for two years and continue to protect against about 50% for up to four years, while NHS guidance describes a usual lifespan of 5 to 10 years. Wear and chipping are expected, so sealants are checked at routine dental visits and repaired or reapplied when needed.

The receipt from the dentist is still on the fridge when the question surfaces at breakfast. Your nine-year-old, mid-crunch on a piece of toast, asks whether the “plastic stuff” on her back teeth is going to come off. You realize you don’t actually know. Nobody said forever, but nobody said six months either.

It’s a fair thing to wonder. Parents ask how long do fissure sealants last more often than almost any other question about them, and the honest answer is more interesting than a single number. Sealants are a thin protective coating, not a repair, and like any coating on a surface that grinds through three meals a day, they wear.

What follows is what the evidence actually shows about lifespan, why some sealants fail early while others quietly work for a decade, and the small habits and check-ups that keep them doing their job.

How long do fissure sealants last? What the evidence actually shows

Start with the most rigorous figures. The CDC reports that sealants prevent about 80% of cavities in the chewing surfaces of back teeth for two years after placement, and keep protecting against about 50% of cavities for up to four years. Those numbers come from school-based programs and clinical studies, so they reflect real mouths rather than laboratory conditions.

The NHS describes a typical working life of 5 to 10 years for fissure sealants, and Cleveland Clinic gives a similar picture, noting that sealants can last up to around a decade but need checking at regular dental visits. Mayo Clinic is more conservative in wording, saying sealants usually last several years before they need replacing.

Why the spread? Because “how long” depends on what you’re measuring. A sealant can be fully intact, partly worn, or completely lost, and protection fades gradually rather than switching off. Studies also differ in how thoroughly the tooth was dried during placement, which material was used, and how often the sealant was inspected and touched up.

Read those numbers together and a sensible expectation emerges. A well-placed sealant on a permanent molar should be doing its job through the highest-risk years of childhood, with a reasonable chance of lasting into the teens. It is not a permanent seal, and it is not meant to be. A Cochrane systematic review published on PubMed found that in children with a high baseline rate of decay, resin sealants reduced the proportion of molars developing cavities from about 40% to about 6% over two years. That is a large effect for a coating thinner than a fingernail, and it holds as long as the coating stays put.

What a fissure sealant is and how it actually works

Run your tongue over a back tooth and you’ll feel ridges and valleys. The valleys are fissures, narrow grooves in the chewing surface; the tiny dips where grooves meet are pits. Some fissures are so deep and narrow that a single toothbrush bristle is wider than the opening. Food and bacteria settle in, brushing can’t reach them, and acid quietly softens the enamel below.

Dentist showing dental model to patient eating sandwich: What a fissure sealant is and how it actually works

A fissure sealant is a flowing liquid, usually a resin (a plastic that hardens under light) or a glass ionomer (a cement that releases fluoride), that is painted into those grooves and set hard. Once cured, it fills the valleys and leaves a smooth, shallow surface that a brush can clean. The mechanism is physical, not chemical: it changes the shape of the tooth so plaque has nowhere to hide.

Most sealants are placed on the first and second permanent molars, which arrive at roughly ages 6 and 12 according to Mayo Clinic and NHS guidance. Those teeth erupt into a mouth still learning to brush well, and their fissures are at their most vulnerable in the first few years after they appear. The CDC notes that school-age children without sealants have almost three times more cavities in first molars than children with them.

Two details matter for lifespan. First, the sealant bonds to the enamel around the groove, not to the deep floor of the fissure, so the edges are where it lives or dies. Second, resin sealants sit slightly above the natural surface at first and are ground down by chewing over months, which is normal wear rather than failure.

What happens at the appointment, step by step

The appointment is short, typically a few minutes per tooth, and involves no drilling, no injection and no sensation of pressure. Children who have had one usually describe it as “weird-tasting” rather than uncomfortable.

The dentist or hygienist first cleans the tooth thoroughly to remove plaque from the grooves. A small cotton roll or a soft rubber sheet keeps the tooth dry, because saliva is the enemy of a good bond. A mildly acidic gel, called etch, is then dabbed on the chewing surface for a short time. Etching microscopically roughens the enamel so the sealant can grip it. The gel is rinsed away and the tooth dried again until it looks chalky.

Next comes the sealant itself. For a resin material, the liquid is flowed into the fissures with a fine brush or tip, guided into every groove, and hardened with a blue curing light held over the tooth for a few seconds. Glass ionomer sealants set on their own without a light. The clinician checks that the coating is complete, runs a probe along the edges, and asks the patient to bite down to make sure nothing feels too high.

That dryness step is where lifespan is decided. Cleveland Clinic and other mainstream sources are consistent that moisture contamination during placement is the leading reason sealants fail early. A child who can’t sit still, a tooth only partly erupted with gum tissue still covering the back edge, or heavy saliva flow can all compromise the bond. This is why clinicians sometimes choose glass ionomer for a partly erupted tooth, or ask to wait a few months until the whole surface is exposed.

Who is usually offered sealants, and who is usually asked to wait

Sealants are a preventive measure, so they are aimed at teeth that are healthy now and at real risk later. The classic candidate is a child whose permanent molars have just come through, with deep grooves that stain easily or trap food, particularly if there is already a history of decay in the baby teeth. CDC guidance singles out school-age children in general, and children from lower-income households in particular, because they are less likely to have sealants and more likely to develop cavities.

Pediatric dentist examining child's mouth in dental chair: Who is usually offered sealants, and who is usually asked to wait

Adults are not excluded. A molar with deep, sound fissures in an adult who has had recent decay elsewhere may benefit, and MedlinePlus notes that sealants can be used at any age when the dentist judges the tooth to be at risk. What matters is the anatomy and the risk profile, not the birthday.

Some teeth are usually asked to wait or are not sealed at all:

  • Molars still partly under the gum, because the back edge cannot be kept dry and the sealant is likely to leak or lift.
  • Teeth with an established cavity that has broken through the enamel surface, which need a filling rather than a seal.
  • Shallow, wide grooves that a toothbrush already cleans well, where the benefit is small.
  • Children who cannot yet tolerate keeping the mouth open and dry for a few minutes; a short delay often makes the difference.

A trickier case is the tooth with an early, non-cavitated lesion, meaning enamel that has started to soften and discolor but has no hole. The Cochrane review and CDC materials both discuss sealing over these early changes to stop them progressing, and many clinicians do so. Whether a particular tooth is sealed, monitored or filled is a judgment call for the treating dentist, made after looking, probing and often taking an X-ray.

How long do fissure sealants last on different teeth, and why some fail early

The same material placed on the same day can last a decade on one molar and lift within a year on its neighbor. Understanding why helps you know what to watch for.

Position matters. Lower molars are harder to keep dry because saliva pools there, and second molars, arriving around age 12, sit far back where access is awkward. Upper first molars tend to have the best retention. Partly erupted teeth are the most likely to lose a sealant early, which is why timing the appointment to full eruption is a standard recommendation.

Material matters too. Resin sealants bond more strongly and stay physically intact longer; glass ionomer sealants are lost sooner but leave fluoride in the enamel. The Cochrane review found insufficient evidence to declare one type better at preventing cavities, so retention alone doesn’t settle the argument.

Chewing habits do the rest. Ice, hard candy, popcorn kernels, pen lids and night-time grinding all chip the edges where the sealant meets enamel. Once an edge opens, food packs in and the rest can peel.

None of this means a partly worn sealant is a disaster. Chewing gradually thins the surface layer while the sealant that has flowed deep into the fissure often remains, still blocking the groove. That is why dentists talk about “retention” in shades rather than as present or absent: fully intact, partly retained, or lost. Regular check-ups, at intervals the dentist sets based on risk, are where these grades are recorded and repairs made. A quick touch-up on a partially retained sealant is one of the most routine procedures in a dental practice, and CDC guidance stresses that sealants should be inspected at every visit and reapplied when necessary.

Resin or glass ionomer? A plain comparison

Most people never learn which type of sealant went on their teeth, and for most it makes little practical difference. It does help explain why one child’s sealants seem to vanish faster than another’s. Here is how the two main classes compare, drawing on the Cochrane review and mainstream clinical descriptions.

Feature Resin-based sealant Glass ionomer sealant
How it sets Hardened with a curing light in seconds Sets chemically on its own over a few minutes
Need for a dry tooth High; saliva contamination is the main cause of early loss Lower; tolerates some moisture, useful for partly erupted molars
Physical retention Longer; more likely to remain visibly intact over years Shorter; more often lost or worn within a few years
Fluoride release Minimal Releases fluoride into surrounding enamel over time
Cavity prevention Well documented in trials Cochrane found insufficient evidence to rank against resin
Typical use Fully erupted molars in cooperative patients Erupting teeth, very young children, mouths hard to keep dry

The takeaway is that the “best” sealant is the one that can be placed well on the tooth in front of the clinician that day. A resin sealant that lifts in three months because the tooth was wet protects nobody. A glass ionomer sealant that wears away in two years may still have deposited fluoride into the groove and bridged the most vulnerable window while brushing skills matured.

Clinicians also sometimes combine approaches, placing glass ionomer on an erupting molar and switching to resin once the whole surface is exposed. Ask which type was used and why; it’s a reasonable question with an ordinary answer.

What the first days and weeks after sealants usually look like

Because a resin sealant is fully hardened before the patient leaves the chair, there is no drying period and no restriction on eating afterward. Cleveland Clinic notes that people can eat and drink immediately. Glass ionomer sealants continue to mature for a while after they set, and some clinicians suggest avoiding sticky foods for the rest of the day; follow whatever your own dental team advises.

The most common comment in the first day or two is that the tooth feels different. A freshly placed sealant sits fractionally above the natural chewing surface, so the bite can feel “tall” or the tongue keeps finding a smooth patch it doesn’t recognize. This sensation usually settles within a few days as chewing evens the surface and the brain stops noticing. If a tooth genuinely feels high enough that it hits first every time the jaw closes, the dentist can smooth it in a minute; that’s an adjustment, not a problem.

Taste is another frequent remark. The etching gel and uncured resin can leave a faint chemical or sour taste for an hour or two. It fades on its own.

Over the following weeks, the sealant surface wears down to sit flush with the enamel. Small flakes at the edges are possible during this period, especially on lower molars, and are worth mentioning at the next visit rather than worrying about immediately.

What you should not experience is pain. Sealants are placed on the outer enamel, which has no nerve endings, so the procedure itself does not cause sensitivity. Lingering ache, sensitivity to hot or cold, or a sharp edge that cuts the tongue are not typical and warrant a call. Beyond that, life goes on: normal brushing twice a day with fluoride toothpaste, normal flossing, normal meals.

What not to do after sealants

Sealants ask very little of their owners, but a handful of habits shorten their lives noticeably. Most are the same habits that damage natural enamel and fillings, so avoiding them helps the whole mouth.

  • Don’t chew ice. The sudden load on a cold, hard surface is the fastest way to chip the edge of a sealant.
  • Don’t crunch hard or sticky candy. Hard candy fractures edges; toffee and caramel can grip a slightly lifted margin and pull it further.
  • Don’t bite pens, pencils, fingernails or bottle caps. These concentrate force on a tiny spot.
  • Don’t skip brushing because the tooth “is protected.” Sealants cover the chewing surface only; the sides of the tooth and the gum line remain vulnerable to decay and gum disease.
  • Don’t ignore night grinding. If a child or adult wakes with a sore jaw or worn tooth edges, mention it; clenching accelerates sealant wear, and a dentist may discuss a night guard.
  • Don’t miss check-ups. A partially lost sealant is easy to repair when caught early and harder to fix once decay has started beneath a lifted edge.

There is also a list of things you don’t need to avoid. Fluoride toothpaste and fluoride varnish are compatible with sealants and are often used alongside them. Sugar-free chewing gum is fine once any glass ionomer has fully set. Normal fruit, bread, cheese and cooked food pose no threat.

Teenagers with sealants sometimes ask about whitening. Over-the-counter whitening products are designed for the front teeth and are unlikely to affect molar sealants, but the sealant material itself does not change shade, so any color mismatch is cosmetic and irrelevant on a back tooth. As always, questions about any product belong with the dental team.

Can cavities grow under sealants?

This is the fear behind many of the questions, and it deserves a straight answer. A cavity does not develop under an intact, well-bonded sealant, because the bacteria that cause decay need a steady supply of sugar to produce acid, and a sealed fissure cuts off that supply. That is the whole point of the procedure.

The more interesting evidence concerns teeth sealed when early decay was already present. Cochrane reviewers and CDC materials both report that sealing over non-cavitated lesions, enamel that has begun to soften but has not broken open, tends to arrest the process rather than hide a growing problem. Bacteria trapped under a good seal are starved and become inactive. This is why some dentists deliberately seal grooves that look stained or slightly soft instead of drilling them, a conservative approach that preserves enamel.

Where cavities can form is under a sealant that has partly lifted. Once a margin opens, food and plaque pack into a space the toothbrush can’t reach, and the sealant that was protecting the tooth now shelters the bacteria. Studies summarized in mainstream reviews suggest that a partially retained sealant does not usually carry a higher risk than a never-sealed tooth, but it does lose the protective benefit. Either way, the fix is the same: the dentist removes the loose portion, cleans and dries the groove, and reseals it.

This is also why sealants are never a set-and-forget treatment and why dental teams inspect them at every visit. The check involves looking, running a fine probe along the edges to feel for gaps, and sometimes an X-ray if there is any doubt. If a hidden cavity is found, it is treated like any other, with the sealant removed and the tooth filled.

Are sealants better than fillings?

The question compares two different jobs. A sealant prevents; a filling repairs. Asking which is better is a bit like asking whether a raincoat is better than a towel.

A sealant goes onto healthy enamel or enamel with only the earliest, surface-level changes. Nothing is removed. If the sealant wears away completely, the tooth underneath is the same as it was, minus the protection. A filling, by contrast, is placed after decay has created a hole. The dentist must remove the softened tissue with a drill, which permanently takes away part of the tooth, and then packs the space with a restorative material. Fillings themselves have a finite life and, when replaced, each new filling tends to be a little larger than the last.

That cycle is exactly what sealants aim to avoid. Mayo Clinic and MedlinePlus both list sealants among the standard preventive measures for reducing decay in children’s back teeth, alongside fluoride toothpaste, limiting sugary snacks and regular dental visits. The CDC estimates that applying sealants in school programs could prevent a large share of first-molar cavities that would otherwise need fillings.

Where the comparison becomes real is the borderline tooth: a groove that is discolored, possibly soft, but not yet broken. One clinician might seal and monitor; another might open it slightly and place a small filling. Both are defensible, and the decision rests on what the dentist sees and feels, sometimes backed by an X-ray. Sealants do not replace fillings once a cavity has broken through the enamel, and no responsible clinician would seal over an open hole.

So the honest answer: sealants are better at preventing cavities in fissures; fillings are the right treatment once a cavity exists. Getting the first right reduces the need for the second.

What are the downsides of dental sealants?

Sealants are among the lowest-risk procedures in dentistry, but no treatment is without trade-offs, and it’s fair to lay them out.

The first is that they are temporary and need maintenance. A sealant that is never checked can partly lift and, as covered above, an open margin can trap plaque. This is not a reason to avoid sealants; it is a reason to keep up with check-ups.

The second is the small possibility of sealing over a cavity that had already broken through the enamel and was missed. Good examination, a dry tooth and, where indicated, an X-ray make this unlikely, and the arrest of bacteria under an intact seal limits the consequences even when it happens, but it is a recognized risk.

The third concern people raise is BPA (bisphenol A), a chemical used in making some plastics. Resin sealants are not made from BPA, but some can release trace amounts of related compounds as they set. Mainstream reviews described by Cleveland Clinic and other sources find that any exposure is very small and brief, mostly in the first hours, and far below levels considered a health concern; wiping and rinsing the tooth after placement reduces it further. Parents who want to avoid resin entirely can ask about glass ionomer, which contains no BPA-related components.

Minor, short-lived downsides include the odd taste during placement, a high bite feeling for a few days, and, rarely, a sealant that flows onto the gum and irritates it until removed. Allergic reactions to sealant materials have been reported but are very rare.

What sealants do not do is weaken the tooth, cause sensitivity when placed correctly, or interfere with fluoride treatments. Weighed against the CDC’s figure of roughly 80% fewer cavities over two years, the downsides are modest, but they are real enough to warrant follow-up.

What people often get wrong about fissure sealants

Some beliefs about sealants are stubborn. Correcting them changes how people care for sealed teeth.

“Sealants are permanent.” They are not, and they are not meant to be. NHS guidance gives a typical range of 5 to 10 years; CDC data show protection fading gradually over about four years. Expect wear, expect checks, and expect occasional repair.

“Once sealed, the tooth can’t decay.” The chewing surface is protected while the seal is intact. The sides of the tooth, the contact points between teeth and the gum line are untouched. Brushing and flossing remain essential.

“A sealant that’s come off means the tooth is now damaged.” Sealants bond to the outside of enamel; when one is lost, the tooth is simply unprotected again, not harmed. The right response is a check-up and, usually, a reseal.

“Sealants are only for children.” Children benefit most because their molars are new and their brushing is developing, but MedlinePlus and Cleveland Clinic both note that adults with deep grooves and a history of decay can be candidates.

“Fluoride and sealants are alternatives; pick one.” They work on different surfaces and by different mechanisms. Fluoride strengthens enamel everywhere; sealants block the grooves fluoride reaches least. Most preventive programs use both.

“If the sealant looks stained it’s failing.” Surface staining at the edges is common with age and is cosmetic. Failure means a gap or lifted margin, which is felt with a probe rather than seen from across the room.

“Sealants hurt.” The procedure involves no drilling or injection and is placed on enamel, which has no nerve endings. Discomfort is limited to holding the mouth open and an odd taste.

Questions to ask your care team

A few minutes of conversation at the appointment turns a passive procedure into something you understand and can help maintain. These questions are ordinary and clinicians expect them.

  • Which teeth are you recommending sealing, and what makes those particular grooves a risk?
  • Is this molar fully erupted, or would waiting a few months give a better bond?
  • Which type of material do you plan to use, resin or glass ionomer, and why for this tooth?
  • Did you see any early changes in the enamel before sealing, and are you sealing over them deliberately?
  • How often will the sealants be checked, and what do you look for at each visit?
  • What signs of wear or chipping should we watch for at home between visits?
  • If part of a sealant comes off, is that urgent, or can it wait until the next scheduled check-up?
  • Are there foods or habits you’d like us to avoid, especially in the first day?
  • Should we continue fluoride varnish or other preventive treatments alongside the sealants?
  • For an adult tooth: is a sealant appropriate here, or would you rather monitor?

Take note of the answers, particularly which teeth were sealed and with what material. Dental records travel imperfectly between practices, and knowing that the lower left first molar has a glass ionomer sealant placed while it was erupting tells a new dentist exactly what to check first.

One question is worth resisting: “How long will this one last?” No clinician can promise a lifespan for a specific sealant. What they can tell you is the typical range from the evidence, the factors that favor or threaten this particular tooth, and the plan for keeping an eye on it. That is the honest version of the answer, and it’s the one that leads to a sealant lasting as long as it can.

When to call your doctor

For sealants, “your doctor” means your dentist or dental team, and most of what follows is a call rather than an emergency. Still, some signs should not wait for the next routine visit.

Contact the practice promptly if you or your child notice:

  • A piece of sealant that has clearly come off, or a rough, lifted edge the tongue keeps catching on, particularly if food is packing into the groove.
  • New sensitivity to hot, cold or sweet in a sealed tooth. Enamel under an intact sealant should not become sensitive, so this can signal a gap or decay beneath.
  • Toothache, throbbing pain or pain on biting in a sealed tooth.
  • A visible dark spot or shadow around or under the sealant that was not there before.
  • Swelling, redness or a small bump on the gum near the tooth.
  • A bite that still feels high after a week or is causing jaw discomfort.

Seek same-day care, or emergency care if a dental practice is not reachable, for severe pain that keeps a child from eating or sleeping, facial swelling, fever with tooth pain, or any swelling that affects breathing or swallowing. These are not typical consequences of sealants but are red flags for dental infection from any cause.

Between those extremes, the guiding principle is simple: sealants are meant to be checked, and a partial loss is easy to fix early. If something feels different and you are unsure, a phone call costs nothing but a few minutes and the dental team would rather look at a healthy tooth than find a cavity later.

Whether a sealant is repaired, replaced, left to wear, or replaced by a filling is a decision for the treating dentist, based on examination and, where needed, X-rays. This article describes what the evidence shows; your own care plan should come from the people who can see the tooth.

Frequently asked questions

How long do fissure sealants last on average?

Several years, not a lifetime. CDC data show about 80% cavity prevention for two years and about 50% for up to four years, while NHS guidance describes a typical range of 5 to 10 years. Protection fades gradually as the sealant wears, which is why dentists inspect and repair sealants at routine check-ups.

Can cavities grow under sealants?

Not under an intact, well-bonded sealant, because the bacteria that cause decay are cut off from sugar. Evidence summarized by Cochrane and CDC shows that sealing over early, non-cavitated enamel changes tends to stop them progressing. Decay can begin under a sealant that has partly lifted, so open edges should be repaired promptly.

Do dental sealants need to be replaced?

Usually at some point, yes. Sealants wear and chip with chewing, and a partly retained sealant is normally touched up rather than fully redone. Dentists check them at each visit by looking and running a probe along the edges. Whether to repair, replace or leave a worn sealant is a decision for the treating dentist.

What not to do after sealants?

Avoid chewing ice, hard or sticky candy, pens and fingernails, which chip the sealant edges, and don’t skip brushing or flossing because the sides of the tooth remain unprotected. Resin sealants harden immediately so normal eating can resume; if glass ionomer was used, follow your dentist’s advice about sticky foods that day.

Are sealants better than fillings?

They do different jobs. Sealants prevent cavities on healthy grooves without removing any tooth; fillings repair decay that has already broken through the enamel and require drilling. Sealants cannot replace a filling once a cavity exists. Preventing decay with sealants reduces the number of fillings a tooth needs over its lifetime.

What are the downsides of dental sealants?

They are temporary and need checking; a lifted edge can trap plaque; and there is a small risk of sealing over a missed cavity. Some resin sealants release tiny, brief amounts of BPA-related compounds, which mainstream reviews consider far below levels of concern. Minor effects include an odd taste and a high bite feeling for a few days.

Why did my child's sealant come off so quickly?

The most common reason is moisture on the tooth during placement, often because the molar was not fully erupted or saliva reached the surface. Lower molars and second molars are harder to keep dry. Early loss does not harm the tooth; the dentist can clean, dry and reseal it, sometimes choosing a different material.

At what age are fissure sealants usually placed?

Most often soon after the first permanent molars appear, around age 6, and again when the second molars arrive, around age 12, according to Mayo Clinic and NHS guidance. Sealants can be placed at any age when a dentist judges deep grooves to be at risk, including in adults with a history of decay.

Do sealants hurt or need an injection?

No. Sealants are placed on the outer enamel, which has no nerve endings, so there is no drilling and no injection. The tooth is cleaned, etched with a mild gel, dried and coated, then hardened with a light. Children typically report an unusual taste and the effort of keeping the mouth open, not pain.

Can I still have fluoride treatments if I have sealants?

Yes, and most preventive programs use both. Fluoride toothpaste and varnish strengthen enamel across all tooth surfaces, while sealants physically block the deep grooves that fluoride and toothbrushes reach least. They complement rather than replace each other; your dental team will advise which combination suits your risk level.

References

This article is for general information only and is not a substitute for professional medical advice. Please consult a qualified doctor about your individual situation.

Dr. Şule Eren
Dr. Şule Eren, MD
Author
View profile →
Published November 15, 2026
Keep Reading

More from the Blog

We’re With You at Every Step

How can we help you today?

We value your privacy We use essential cookies to run this site and, with your consent, analytics cookies to understand how it is used and improve it. You can accept, reject, or choose what to allow. See our Cookie Policy.